HELP Regarding Frimware Update Of Nokia C5-03

[NaJaM121]

HelLo AlL GuyeSs : I'm New Here : Recently I Updated My Mobile'Ss Firmware To 23.0.0.1 But I Want To use CustoM Firmware I use Pheonix To Flash And Update Custom Firmware But It Bricks My Phone : Now My Phone is Just Vibrating On Powering on : I Try JAF And Pheonix But In Pheonix I Got Communication Error And In JAF I Got "Error reading phone init data..."
Help me please Please Please
SomeOne Come On Teamviewer And Help mE Or Give me TuT Please Thanx
RegArDsS

[jubiect]

Which Custom Firmware are you trying to flash ?
Check its firmware version
Also only use Phoenix, JAF does not support C5-03.

[NaJaM121]

I was InStalLiNG ThiSs ONE  : CFW Symbian^Nimble-PRO_CANDY XtrEmE RM-697  V22.0.007  
 Now Need Your Help GuyeSs : My PhoNe iS JuSt Bricked

[jubiect]

I was InStalLiNG ThiSs ONE  : CFW Symbian^Nimble-PRO_CANDY XtrEmE RM-697  V22.0.007 

 Now Need Your Help GuyeSs : My PhoNe iS JuSt Bricked

The problem is that you updated your phone's firmware earlier to v23.0.0.1

The CFW you tried to flash with is based on v22.0.007.

That why your phone bricked.

Now there are two options to make your phone alive.



1st One (100% Working) : You can revert back to your Original firmware, for that follow these steps



1. Download Navifirm from here

2.Open it and Find the Original ofw (v23.0.0.1) by selecting your device its RM etc...
Then download all the files in it and Copy these files to "Program Files\Nokia\Phoenix\Products\RM-697\"

(Make sure only these files are there in the folder 'RM-697'

3. Open phoenix ->

    Press 'File' ->

    Choose 'open product' from file menu ->

    Choose RM-697 ->

    In connection select 'NO CONNECTION' ->

    Open 'Flashing' Menu and choose Firmware Update ->

    Choose product code from browse button ->select it ->press 'ok' ->

    Check 'Dead USB' -> press 'REFURBISH' button and follow instructions given at the time of flashing.-->  click 'ok'

4. Now connect your Switched OFF CELLPHONE to computer

5. Wait until a pop-up message appears saying that flashing is complete. Done.

6. Wait for your phone to boot



                                           OR



2nd one (Maybe Work) : you can downgrade to v22.0.007 by flashing with "Symbian^Nimble-PRO_CANDY XtrEmE RM-697  V22.0.007".



If you are considering this step, follow the guide in the CFW page.

But just one change in that guide is necessary, which is :



Just after this step  :

 go to 'options' button -> then Delete following files - a. C5-03_SW_MC013_45_2G_6.0.fpsx

b. RM-697_22.0.007_C01_prd.rofs3.fpsx -->  then click the .C00 file, click edit, choose the .C00 file in 'XtrEmeFF' folder

-->  then click the .rofs2.V21 file, click edit, choose the .rofs2.V21 file in 'Xtreme

folder

--> then click the .uda file, click edit, choose the RM697_719_014_U002.uda.fpsx in

the  'Xtreme' folder"



Before clicking 'ok' you'll see a "Allow Downgrade" checkbox select it and then press ok.



Then continue with guide in the CFW page.

[NaJaM121]

Thanx I Restore My Orignal FrameWork But Now I need CFW For V23.0.015

[jubiect]

Try this :
Keep v23.0.015 files in rm-697 folder
Start flashing by opening phoenix
Click options and delete rofs3 and a 'memory card file'
Click edit and change rofs2 to candy xtreme cfw's rofs2
Then continue flashing

[NaJaM121]

i Do This But It Bricks My Phone : Here is Logs Of Pheonix

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
Loading update server code: 824803 bytes
Update server loaded
Erasing....
Erasing complete
Asic CMT: Start programming 198734 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Started product mode change
Product mode change complete
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Firmware updating succeeded.

[jubiect]

i Do This But It Bricks My Phone : Here is Logs Of Pheonix

Flashing started
Creating product data items list
Product data items list created
Backup not required
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
ERROR: Failed to set phone to flashmode
Flashing phone
Initializing
Scanning image files...
Waiting for USB device...
Loading secondary boot code: 15168 bytes
Secondary boot loaded
Loading update server code: 824803 bytes
Update server loaded
Erasing....
Erasing complete
Asic CMT: Start programming 198734 KB...
Asic CMT: Programming data sent: 0%
Asic CMT: Programming data sent: 10%
Asic CMT: Programming data sent: 20%
Asic CMT: Programming data sent: 30%
Asic CMT: Programming data sent: 40%
Asic CMT: Programming data sent: 50%
Asic CMT: Programming data sent: 60%
Asic CMT: Programming data sent: 70%
Asic CMT: Programming data sent: 80%
Asic CMT: Programming data sent: 90%
Asic CMT: Programming data sent: 100%
Programming complete
Asic CMT: programming succeeded
Asic CMT: Verifying communication to device...
Waiting for communication response: 25
Waiting for communication response: 24
Phone flashing completed. Waiting for phone to boot up
Bootup successful
Verifying communication to product (before flash finalizing)
Communication verified
Product code changed
Started product mode change
Product mode change complete
Doing factorysets
Factorysets complete
Loading default data to phone
Loading default data to phone
Getting Data Package
Reading product state
Starting backup/restore sub-procedure: data item pre-delay
data item pre-delay
data item pre-delay
Sub-procedure completed: Succeeded., result code: 0
Starting to backup/restore data item: ProductProfile, version: 1.1
Data Item backup/restore completed: Succeeded., result code: 0
Starting backup/restore sub-procedure: data item post-delay
data item post-delay
data item post-delay
Sub-procedure completed: Succeeded., result code: 0
Backup/restore result: 0 out of 1 items were not backed up
Default data loading complete
Stopping all operations, returning phone to default mode
All operations completed
Firmware updating succeeded.

Then we will have to wait for someone to create a CFW based on V23.0.015

[omkarkul]

for new version cfw is not released
have to wait for it..............................