Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

[oreo27]

hi.. I have two dead 5800XM..I did the flashing procedure but on the pooling part, my phones doesn't restart resulting
to failed flashing (I guess).. Will I still be able to revive my phones?.. I've been flashing the whole day..badly need your help..

 

what caused them to be dead in the first place?

[MOAYAD92]

Is there somebody to help me
When I started the installation of cfw to my Nokia C 6-00
Stopped at this stage

Rebooting to flash mode ...
Waiting for the phone to reboot ...
Searching for phone ...
Sending RAW loader ...
Using 009.012.005
     Elf2flash 10.05.000
     CMT RAW loader ...
Patching RAW boot step1 ...
Patching RAW boot step2 ...
Patching RAW boot step3 ...
Sending RAW Loader ...
.................... Loader Sent!
Stage 2 starting .............
Please help

Knowing you, I add some modes

[oreo27]

Is there somebody to help me
When I started the installation of cfw to my Nokia C 6-00
Stopped at this stage

Rebooting to flash mode ...
Waiting for the phone to reboot ...
Searching for phone ...
Sending RAW loader ...
Using 009.012.005
     Elf2flash 10.05.000
     CMT RAW loader ...
Patching RAW boot step1 ...
Patching RAW boot step2 ...
Patching RAW boot step3 ...
Sending RAW Loader ...
.................... Loader Sent!
Stage 2 starting .............
Please help

Knowing you, I add some modes

Does it still boot?

[foreplayco]

Good day guys.

Just a newbie question..

I have a Nokia X6 v20 and I want to update it to the latest version (v31 or v32).

Does the instructions on the first page will work for my X6?  I mean, can I use this procedure on updating my firmware via jaf?  I'm a bit worried coz as we all know, X6 has an internal storage instead of a micro sd card.

Thanks in advance and sorry for the newbie question.

[oreo27]

Good day guys.

Just a newbie question..

I have a Nokia X6 v20 and I want to update it to the latest version (v31 or v32).

Does the instructions on the first page will work for my X6?  I mean, can I use this procedure on updating my firmware via jaf?  I'm a bit worried coz as we all know, X6 has an internal storage instead of a micro sd card.

Thanks in advance and sorry for the newbie question.

Yes, it is the same procedure. Do you wish to retain or remove the information on the microSD card?

[gillesmab]

Hi,
I've been trying to revive a dead Nokia 6288 with both Phoenix and Jaf, this is what I get :

Phoenix:
Initializing
Cmt->Connection opened succesfully
Cmt->Bootcode started, continue flashing...
Cmt->Config data received from boot code succesfully
Cmt->Ulo size  = 14464
Cmt->Raw data sending. (Data left 13696)
Cmt->Raw data sending. (Data left 12928)
Cmt->Raw data sending. (Data left 12160)
Cmt->Raw data sending. (Data left 11392)
Cmt->Raw data sending. (Data left 10624)
Cmt->Raw data sending. (Data left 9856)
Cmt->Raw data sending. (Data left 9088)
Cmt->Raw data sending. (Data left 8320)
Cmt->Raw data sending. (Data left 7552)
Cmt->Raw data sending. (Data left 6784)
Cmt->Raw data sending. (Data left 6016)
Cmt->Raw data sending. (Data left 5248)
Cmt->Raw data sending. (Data left 4480)
Cmt->Raw data sending. (Data left 3712)
Cmt->Raw data sending. (Data left 2944)
Cmt->Raw data sending. (Data left 2176)
Cmt->Raw data sending. (Data left 1408)
Cmt->Raw data sending. (Data left 640)
Cmt->Raw data sending. (Data left 0)
Cmt->Raw data sending. (Data left 224704)
Cmt->Raw data sending. (Data left 220608)
Cmt->Raw data sending. (Data left 216512)
Cmt->Raw data sending. (Data left 212416)
Cmt->Raw data sending failed Error Code: 84009427 (Dtl: Could not send data to the driver, reason: 0x84004410. Common USB DCM:
Message send failed, last error code = 0x8007001F. )
Cmt->Closing RAW Connection...

JAF :

JAF version 1.98.62
Detected PKEY: 90009B6C
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.41.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-78\

Searching for default location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-78\Products\RM-78\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-78\
Scanning ini files...
Searching for default location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-78\Products\RM-78\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-78\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-78\rm7830006.430.mcusw
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-78\rm783006.43.ppm_t
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-78\rm7830006.43.image_optus_mzn_v3_sk
APE Variant file: NONE
Languages in ppm: English,Vietnamese,Tagalog,Chinese Simpl,Chinese Trad
Detected P-KEY: 90009B6C
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 06.02.002
   Elf2flash 02.31.000 RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
...................Loader Sent!
Stage 2 starting...Error booting phone...

Apparently I only get 6 files when I download my fw with Navifirm :
RM78_0556841_06.43_003.dcp
RM78_0556841_06.43_003.vpl
RM78_0556841_06.43_003_signature.bin
rm7830006.43.ppm_t
rm7830006.43.image_optus_mzn_v3_sk
rm7830006.430.mcusw

Isn't there at least one file missing and if there is what is it and where can I download it from ?

Thanks for your help, I'm really stuck with my dead phone, hope to hear from you soon,

        gillesmab.

[bodsjack]

JAF version 1.98.62
Detected PKEY: 90009699
Card life counter: 99.99%
P-key nokia module version 01.02
FBUS INTERFACE NOT CONNECTED!!!
USB Cable Driver version: 7.1.45.0
Changing mode...Done!
FILES SET FOR FLASHING:
MCU Flash file: NONE
PPM Flash file: NONE
CNT Flash file: NONE
APE Variant file: NONE
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\

Searching for default location of ini...
Checking path: \Products\RM-625\
Searching for JAF saved location of ini...
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
Scanning ini files...
Searching for default location of ini...
Checking path: \Products\RM-625\
Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-625\
FILES SET FOR FLASHING:
MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.core.C00
PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_prd.rofs2.V21
CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM-625_50.1.001_C01_prd.rofs3.fpsx
APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-625\RM625_50.1.001_000_000_U001.uda.fpsx
Languages in ppm: English,Philipines,Bangladesh,Australia,Indonesia,India,Vietnam,New Zealand
Detected P-KEY: 90009699
P-key nokia module version 01.02
Init usb communication...
PRESS POWER ON NOW!
Searching for phone...Found
Sending RAW loader...
Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
Patching RAW boot step1...
Patching RAW boot step3...
Sending RAW Loader...
Error booting phone...





I used the update for JAF ini files. But now im getting this error

Mine is Nokia 5233 RM-625 v50

[bsilvan]

Can I use this procedure to change from RM-551 32.2.002 to RM-559 on my Nokia X6??? Or this is a downgrade???

[VDS5344]

no mate never try to exchange rm please use only rm 551 and same or upper version files only

[srikanth98487]

Pls help me to unlock security code of nokia 5800 xm?give me latest link of JAF

[VDS5344]

I'll mail you gimme your email id

[glamer]

is jaf supports windows7

[casseer15]

my phone failed to flash
all the procedure took place as normal but at the pooling stage, it phone just keep turning on & off with horizontal lines.
jaf says if the phone is not responding press no & otherwise press yes.(something like that)

with pheonix, it fails at 98%

please help me.

[mirceajemna]

can i flash my nokia e55 with jaf ?

[dvirus00]

Help plz!!!
When i was flashing my phone my phone went dead and its not starting.i tried everything bt nothing is working...please help me out...
Thanx in advance...