Join Today
Enjoy an ad free experience by logging in. Not a member yet? Register.
Results 1 to 10 of 10
  1. #1
    Senior Member
    Join Date
    Feb 2010
    Posts
    485
    Thanks (Given)
    4
    Thanks (Received)
    0

    Default [SORTED]flashed my x6(same as 5800),now its dead...only vibrates continuously

    i have flashed my X6 with cfm,and phone is absolutlely dead now.when i switch it on,it just vibrates non stop,so i have to take a battery out to stop it.i was trying to flash it again with an original firmware using both jaf and phoenix in dead mode,but with no luck....btw both phoenix and jaf logs say that flash was succsessful....any chance i can revive it? thanks in advance

  2. #2
    Senior Member
    Join Date
    Jun 2009
    Posts
    512
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: flashed my 5800,now its dead...only vibrates continuously

    Did you try these settings?



    So don't enable "use ini", but select the files yourself.

    mcu=core
    ppm=rofs2
    cnt=rofs3
    ape=uda

  3. #3
    Senior Member
    Join Date
    Nov 2009
    Posts
    232
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: flashed my 5800,now its dead...only vibrates continuously

    Paste your JAF log here

  4. #4
    Senior Member
    Join Date
    Feb 2010
    Posts
    485
    Thanks (Given)
    4
    Thanks (Received)
    0

    Default Re: flashed my 5800,now its dead...only vibrates continuously

    JAF version 1.98.62
    Detected PKEY: 90007BF6
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.22.0
    Changing mode...Done!
    Для прошивки выбраны следующие файлы:
    MCU (основной файл прошивки) : NONE
    PPM (языковой пакет) : NONE
    CNT (контент) : NONE
    APE Variant file: NONE
    Для прошивки выбраны следующие файлы:
    MCU (основной файл прошивки) : NONE
    PPM (языковой пакет) : NONE
    CNT (контент) : NONE
    APE Variant file: NONE
    Для прошивки выбраны следующие файлы:
    MCU (основной файл прошивки) : NONE
    PPM (языковой пакет) : NONE
    CNT (контент) : NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\

    Searching for default location of ini...
    Checking path: \Products\RM-559\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: \Products\RM-559\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
    Для прошивки выбраны следующие файлы:
    MCU (основной файл прошивки) : C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00
    PPM (языковой пакет) : C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V05
    CNT (контент) : C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx
    APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx
    Detected P-KEY: 90007BF6
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Error reading phone init data...
    Detected P-KEY: 90007BF6
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting................PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    ..........Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 654, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 0B71FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V05...
    Erasing cmt zone 07920000 - 0A2FFFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx...
    Erasing cmt zone 0A300000 - 0B71FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx...
    Erasing cmt zone 0B720000 - 1EF7FFFF ... Erase result: 0000
    Send CMT CFG...

    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    cmt->PAPUB keys already sent...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_prd.rofs2.V05...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_C03_prd.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_20.0.005_001_000_U001.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: V ICPR72_10w04.5
    22-03-10
    RM-559
    (c) Nokia
    APESW: V 20.0.005
    VariantSW: V 20.0.005
    Prodcode: 0599985
    Setting test mode...
    Setting FULL FACTORY...
    Operation took 0 minutes 7 seconds...
    Done!
    Done!
    p.s. sorry it is x6,my mistake,but i was cooking my cfm using nokia editor 6 before........it was fine with x6,i hacked it,put some effects in rofs2,but now its dead.....

  5. #5
    Senior Member
    Join Date
    Nov 2009
    Posts
    232
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: flashed my x6(same as 5800),now its dead...only vibrates continuously

    Are you from Ukraine ??
    Write here your product code its under battery.

  6. #6
    Senior Member
    Join Date
    Feb 2010
    Posts
    485
    Thanks (Given)
    4
    Thanks (Received)
    0

    Default Re: flashed my x6(same as 5800),now its dead...only vibrates continuously

    no man,i am russian...i just wanted to test new firmware,cos it has kinetic scroling in menu and some bug fixes for x6.my original code is 0595749.....i am in uk now...bought from o2....

  7. #7
    Senior Member
    Join Date
    Feb 2010
    Posts
    485
    Thanks (Given)
    4
    Thanks (Received)
    0

    Default Re: flashed my x6(same as 5800),now its dead...only vibrates continuously

    SORTED now.one of the firmware files was corrupted during download i think,cos when i downloaded it again and flashed my phone it revived.thank you all for help

  8. #8
    Junior Member
    Join Date
    Aug 2011
    Posts
    1
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: [SORTED]flashed my x6(same as 5800),now its dead...only vibrates continuously

    helo guys...
    pleasa help me... my x6 is dead after flashing..

    here is the detail about the flashing...


    JAF version 1.98.62
    Detected PKEY: 90009B6C
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.34.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\

    Searching for default location of ini...
    Checking path: \Products\RM-559\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: \Products\RM-559\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
    Changing flashing settings...
    Searching for default location of ini...
    Checking path: \Products\RM-559\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.core.C00
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.rofs2.V20
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_C01_prd.rofs3.fpsx
    APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_001_000_U001.uda.fpsx
    Languages in ppm: English,Vietnamese,Tagalog,Chinese Simpl,Chinese Trad
    Detected P-KEY: 90009B6C
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting................PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    ..........Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 1000, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 0B71FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.rofs2.V20...
    Erasing cmt zone 032C0000 - 0B61FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_C01_prd.rofs3.fpsx...
    Erasing cmt zone 0A300000 - 0B71FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_001_000_U001.uda.fpsx...
    Erasing cmt zone 0B720000 - 1EF7FFFF ... Erase result: 0000
    Send CMT CFG...

    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    cmt->PAPUB keys already sent...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*ENO
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.rofs2.V20...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_C01_prd.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_001_000_U001.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    Phone not found...
    Done!
    Changing flashing settings...
    Searching for default location of ini...
    Checking path: \Products\RM-559\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-559\
    Detected P-KEY: 90009B6C
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting................PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    ..........Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 1000, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 0B71FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.rofs2.V20...
    Erasing cmt zone 032C0000 - 0B61FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_C01_prd.rofs3.fpsx...
    Erasing cmt zone 0A300000 - 0B71FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_001_000_U001.uda.fpsx...
    Erasing cmt zone 0B720000 - 1EF7FFFF ... Erase result: 0000
    Send CMT CFG...

    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    cmt->PAPUB keys already sent...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*ENO
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_prd.rofs2.V20...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_C01_prd.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-559\RM-559_32.0.002_001_000_U001.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    Phone not found...
    Done!

    already giving up..hmmm

  9. #9
    Junior Member
    Join Date
    Dec 2009
    Posts
    13
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: [SORTED]flashed my x6(same as 5800),now its dead...only vibrates continuously

    u have not used ur core files correctly..flash again with ur newly updated core...

  10. #10
    Member
    Join Date
    May 2009
    Posts
    51
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: [SORTED]flashed my x6(same as 5800),now its dead...only vibrates continuously

    You said you are flashing with CFW so you MUST NOT use rofs3. Delete it and try again


 

Similar Threads

  1. N97 Death Phone Flashed with JAF Succesfull
    By PlayaDeluxe in forum Symbian S60v5 Firmware Discussion
    Replies: 10
    Last Post: 03-07-2013, 06:55 PM
  2. [SORTED]flashed my 5800,now its dead...only vibrates continuously
    By varfolomey in forum Symbian S60V5 Modding
    Replies: 11
    Last Post: 10-07-2011, 11:03 AM
  3. SOLUTION for "Phone dead after flash and doesn't turn on, only vibrates once"
    By driq in forum Symbian S60v5 Firmware Discussion
    Replies: 25
    Last Post: 06-23-2011, 06:13 PM
  4. [SORTED,REPLACED] X6 dead pixel...any solution?
    By varfolomey in forum Symbian S60v5 Forum
    Replies: 12
    Last Post: 04-08-2010, 07:29 PM
  5. My 5800 VIBRATES WHILE CHARGING!
    By shadow_shooter in forum Symbian S60v5 Forum
    Replies: 3
    Last Post: 11-01-2009, 03:15 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •