Join Today
Enjoy an ad free experience by logging in. Not a member yet? Register.
Page 1 of 5 123 ... LastLast
Results 1 to 10 of 47
  1. #1
    nasua
    Guest

    Default Tools for firmware updating and product code switching !!!

    Be careful these tools can brick your phone !!!!! Use them at your own risk

    Nokia Software Updater (WinAll)
    http://europe.nokia.com/A4579163

    Code:
    Use the Nokia Software Updater application to help you update your Nokia device software. 
    Nokia Software Updater is compatible with most Nokia devices. 
    In addition, it is recommended to use the lastest version of the Nokia PC Suite software.
    
    Allows you to download and install the latest Nokia device software.
    Only needs to be downloaded once to your PC.
    Nokia PC Suite Cleaner (WinAll)
    http://europe.nokia.com/A41198596

    Code:
    Nokia PC Suite Cleaner helps you remove any unnecessary Nokia PC Suite-related files 
    and registry data left on your PC after uninstalling Nokia PC Suite.
    
    Important: Before using Nokia PC Suite Cleaner, make a backup copy of all your personal 
    content that is stored in the same folder as Nokia PC Suite.
    
    If you have personal files stored in the folder where Nokia PC Suite is installed, 
    Nokia PC Suite Cleaner may remove these in addition to Nokia PC Suite-related data. 
    Nokia PC Suite Cleaner moves the personal files into recycle bin.
    
    With Nokia PC Suite Cleaner, you can:
    
    Remove old or unnecessary Nokia PC Suite-related files from your PC to make way for a new installation
    Clean both Nokia PC Suite files and registry data
    Leave other content on your PC intact
    Nemesis Service Suit 1.0.38.14 (XP, No support for 5800)
    http://www.b-phreaks.co.uk/files/NSS/NSS103814.zip

    Code:
    Nemesis Survice Suite is our latest Nokia servicing solution. It supports all our current hardware devices 
    - Nemesis Multiflasher Box, F1 device and Prodigy LPT device. It can also interface with Diamond for secure execution 
    of additional applications. The most usefull function is probably the VUD mode (Virtual USB Device) where it can directly 
    comunicate with any BB5 phone via DKU-2 USB cable. We are still providing free download of the latest Beta versions of NSS
    Phoenix Service Software 2008.44.5.36625 V.2 (XP)
    http://rapidshare.com/files/17919340...08_44_5_v2.exe

    Code:
    This release contains improved installer, changes: 
    
    - installs over old Phoenix, even if it can’t be properly uninstalled, 
    - removes flsdevcp.exe and tray.exe from autostart and memory, 
    - removes DK2 Network Server menu form Menu Start, 
    - no longer installs fls4.exe, 
    - new user interface, just because I wanted it to look better
    Phoenix Service Software 2009.4.12.37934 V.2 (XP)
    http://rapidshare.com/files/21676091...09_4_12_v2.exe

    Code:
    This Phoenix Service Software installation package includes following SW components: 
    
    - MSXML 6.0 Parser
    - VC++ redistributable
    - Phoenix Service Software 2009.4.12.37934
    - DK2 Dongle Driver v 7.14.0.25
    - Nokia Connectivity Cable USB Driver v 7.1.8.0 (for Win2000 6.85.15.0)
    - Flash Update Package 09_12_05_14
    - FLS-x Dongle Driver v 2.09.26
    - FPS-11 version 5.10.0
    
    Flash Update Package is 09_12_05_14 - you can flash N96 without problems. As always, only USB cable needed, enjoy!
    Phoenix Service Software 2009.12.7.38366 (WinAll)
    http://rapidshare.com/files/23391002...12.7.38366.exe

    Code:
    Phoenix Service Software 2009.12.7.38366 
     
    Simply download and enjoy. Check release information below.
    
    I have no idea if it works on Windows 7 on Virtual XP machine - but it surely doesn't work in native Windows 7 environment. Let me know if it works on virtual XP.
    
    MULTI PROTOCOL PHOENIX SERVICE SOFTWARE 2009.12.7.38366
    Published 08/05/2009 Size 131.4 MB
    APAC - Service Software & Driver -> Phoenix & Bulletin
    File type -> . Phoenix Multi Protocol & Bul
    
    1. CHANGE HISTORY
    Version 1 06.05.2009 Initial version
    2. INTRODUCTION
    New version of Phoenix service software is available. This multi-protocol service software supports Nokia
    CDMA, GSM, TDMA, and WCDMA products.
    
    Main component versions in the release:
    • DK2 Driver Version 07.14.0.25
    • Nokia Connectivity Cable USB Driver Version 7.1.16.0 (For Win2000 driver version 6.85.15.0)
    • Flash Update Package 009.018.010 
    • FLS-x Drivers Version 2.09.26
    Version 1 06.05.2009 Initial version
    • FPS-11Version 5.10.0
    
    
    3. CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2008.04.11.37849
    New products supported: 
    • RM-578, RM-579, RM-508, RM-547, RM-566, RX-51, RM-565, RM-546, RM-529, RM-530, RM-
    491, RM-564, RM-562, RM-563
    
    New features
    • New rf_losses.ini ver.40 for autotune function
    
    Error Corrections & changes
    • Improvements to N96 USB Flasing
    • Flash Update Package 09.18.10.8 with improve,ments to random “finalization failed” – problems for
    models with OMAP2420.
    • Corrections for Network Prommer Maintenance
    • Improvements for Tucson Product Code Change and BB5 Certificate Restoring with “Flash Phone”
    – option selected.
    • Improvements for connection manager when used with FLS-5
    
    4. KNOWN ERRORS & LIMITATIONS
    • Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data
    Package 2 concept.
    • Flashing with FLS-5, SS-46 and product specific adapter is not reliable for all BB 5.0 products, 
    new driver release with corrections will be released soon.
    • Flash Update Package File installation path may be wrong. If you experience problems when
    updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the
    files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not,
    Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix
    “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other
    prommers except the FPS-8.
    • Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one,
    do not attempt to service more than 5 phones at the time
    
    
    5. INSTALLATION 
    If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.
    
    1. Download Phoenix_Service_Software_2009_12_7_38366.exe application file to your computer
    (e.g. C:\TEMP). 
    2. Close all other programs.
    3. Run Phoenix_Service_Software_2009_12_7_38366.exe and follow instructions on the screen to
    install Phoenix Service Software
    4. Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
    5. If you are prompted to update any existing driver or file versions, select “yes”.
    6. Depending on the operating system, the PC may require rebooting.
    7. Allow Windows to register the Phoenix components.
    8. Open Phoenix and update your prommer with the latest software included in this installation
    package.
    9. Use the latest available product specific data packages or flash bundles with new multi-protocol
    Phoenix.
    Supported operating systems and user rights
    • Windows 2000 Service Pack 4 or higher
    • Windows XP Service Pack 1 or higher
    • When installing Phoenix into Win 2000 or XP you must have local admin rights.
    • When using in Win 2000 or XP, user must have power user rights.
    
    For HW & Tool requirements please refer to Service Repair Processes TB-209
    For information on product specific data packages, tools and instructions please refer to service manuals and technical bulletins.
    If you want to use FPS-11, please download separate FPS-11 driver package
    If you are installing this version of Phoenix on a new Imaged PC, and you are using an FLS-4S or FLS-5
    during the install, then install the FLS-X drivers first.
    Phoenix (Internal) Service Software 2009.12.7.38366 v.2 - improved setup (WinAll)
    http://rapidshare.com/files/23929703...2009.12_v2.exe

    Code:
    I decided to drop the old installer and create something more flexible. Changelog:
    
    - works with Windows 7/Vista (32 bit) - as of Win7 RC1,
    - you can install Phoenix Internal during setup,
    - you can uninstall Phoenix via Control Panel or Start Menu icon,
    - setup loads much faster (due to reduced compression ratio),
    - reduced (even more) risk of installation problems,
    
    I am pretty sure I have covered all the goals I was facing when I started to release Phoenix. I will concentrate on updating Phoenix to latest versions.

    Nokia Care Suite 1.3.6 2009.13.0 (XP)
    http://rapidshare.com/files/21753663..._13_0.msi.html

    http://rapidshare.com/files/22821362..._2009_13_0.msi

    http://uploaded.to/file/wzeuwh

    Nokia Care Suite Guide For Newbies
    http://www.easy-share.com/1904936729...uite_guide.rar


    Code:
    Please note that this release should be considered a beta release for GSM/WCDMA models 
     
    This release should only be posted in NOL for all CDMA markets and India. 
     
    Service SW installation packages and Technical Bulletins are available from NOL. 
    
    CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 1.3.5 2008.42.5 
    • Multi flashing tools have been enabled for CDMA (GSM also, but it doesn′t work) 
    • Connection can be added without restarting Care Suite 
    • Improvements enabling Fuse application to close properly 
    • Finish - button available after recovery is finished  
    • Improvements enabling PST application to close properly 
    • Plugins are displayed correctly 
    • Improvements to product log writing 
    • Nokia Care Suite icon is visible on the desktop 
    • Error shown when a product without supported is connected 
    • Improvements to “Number of storing days” field for Product Log 
    • Error occures when product log location is set to non existing location 
    • Self test reporting only activated for RH-111 
    
    KNOWN ERRORS & LIMITATIONS 
    • Error message appears Setiings Editor when user wants to open settings file  
    • CDMA multi provisioning can not program PRL, ERI, Contacts and MDN information 
    • CDMA Settings editor not compatible with N8208 / RM-384 and N2608 / RM-376 
    • Fatal Error occurs when closing Product Support Tool in Vista 
    • Message 'fatal error during installation' may be shown 
    • Error during uninstallation may be shown 
    • Fuse Problems with N1202 / RH-111 detecting 
    • Fuse Confirmation dialog during changing connection's name does not work properly 
    • Multi Refurbish/Automatc start in Multi Refurbish process doesn't work properly when user 
    connects new product 
    • UI elements and WinVista do not work properly 
    • Scroll bar in Fuse doesn't change its position when user drag and drop it 
    • Internal Module Error during N96 / RM-247 refurbish 
    • Downloading software update package fails during multi refurbish 
    • Fuse: An error occurs while attempting to close the dialog 
    • Software Update/ Error messages appear during DCT-4 update process 
    • Application Launcher is not closed after downloading NCS update package.

    JAF 1.98.62 (XP,Vista 32-Bit)
    http://rapidshare.com/files/186146404/JAF.1.98.62.rar
    JAF PKEY Emulator v4.0
    http://www.megaupload.com/?d=ANG6RHPQ
    JAF PKEY Emulator v5.0
    http://www.megaupload.com/?d=QYR4571O

    Code:
    Works both with USB cable and UFS boxes. Allows to downgrade (and possibly dead flash over usb) all bb5 phones. 
    Also reads security code and creates certificate backup.
    Note: Non of these Tools have 64-Bit support.

    Firmware for your phone use Navifirm firmware downloader http://www.dailymobile.net/forum/ind...sg8589#msg8589

  2. #2
    mufaddal_km
    Guest

    Default Re: Tools for firmware updating !!!

    there is a new version of phoenix tools Phoenix 2008.44.5.36625 – v. 2
    This release contains improved installer, changes:
    - installs over old Phoenix, even if it can’t be properly uninstalled,
    - removes flsdevcp.exe and tray.exe from autostart and memory,
    - removes DK2 Network Server menu form Menu Start,
    - no longer installs fls4.exe,
    - new user interface

    If you already have Phoenix 2008.44 installed, you don’t need this release. However, if you had any problems installing previous versions, this one should install properly
    Added link to top post

  3. #3
    mufaddal_km
    Guest

    Default Re: Tools for firmware updating and product code switching !!!

    Added link to top post.

  4. #4
    Junior Member
    Join Date
    Jan 2009
    Posts
    26
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Tools for firmware updating and product code switching !!!

    Can i change my product code with Nokia care suite on my 5800 ?

  5. #5
    mufaddal_km
    Guest

    Default Re: Tools for firmware updating and product code switching !!!

    no only with phoneix tools

  6. #6
    Junior Member
    Join Date
    Jan 2009
    Posts
    14
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Tools for firmware updating and product code switching !!!

    I'm unable to install Phoenix v2 on my vista x64 is there somthing special to install it ?

    there is a picture :

  7. #7
    mufaddal_km
    Guest

    Default Re: Tools for firmware updating and product code switching !!!

    phoenix doesnt support 64 bit windows vista ....
    even if u install it creating windows xp in virtual machine still u will have issues ...

  8. #8
    Junior Member
    Join Date
    Jan 2009
    Posts
    14
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Tools for firmware updating and product code switching !!!

    Ok i see.. is there an other way to change the Branding number (safer) for the Nokia 5800 ?

  9. #9
    mufaddal_km
    Guest

    Default Re: Tools for firmware updating and product code switching !!!

    u can change ur product code with jaf ..but the problem is jaf supports only 32 bit vista and not 64 bit
    http://www.dailymobile.net/forum/index.php?topic=1525.0

  10. #10
    Junior Member
    Join Date
    Jan 2009
    Posts
    14
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Tools for firmware updating and product code switching !!!

    Thank i'll try on an other pc, just a question could you rollback the product code to it's original number after that ? (cause the warranty..)


 
Page 1 of 5 123 ... LastLast

Similar Threads

  1. Download Nokia Product Codes for different phones and regions
    By phattrance in forum Symbian S60v5 Firmware Discussion
    Replies: 76
    Last Post: 01-11-2011, 06:31 PM
  2. NAVIFIRM: A tool for obtaining firmware, product codes, more
    By mufaddal_km in forum Symbian S60v5 Firmware Discussion
    Replies: 259
    Last Post: 10-01-2010, 07:54 PM
  3. Problem updating FirmWare with Nokia Software updater? Any other way to do this
    By BS2008 in forum Symbian S60v5 Firmware Discussion
    Replies: 10
    Last Post: 02-15-2009, 05:37 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •