Join Today
Page 1 of 73 123 11 51 ... LastLast
Results 1 to 10 of 729
  1. #1
    mufaddal_km
    Guest

    Default Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    USE THIS MOD AT YOUR OWN RISK.

    TRY THIS ONLY IF U ARE NOT ABLE TO FLASH WITH PHOENIX


    Downgrade process requires the pkey hardware! It is not recommended to do a Firmware Downgrade (will brick your phone)!

    this guide will explain how to flash your dead nokia phone using jaf tool ...
    this guide is especially for those who have trouble installing phoenix on their sytems or those who cant revive their phones using phoenix

    especially for windows vista users as phoenix deesnt support vista officially `and jaf tool has support for windows vista 32 bit omly

    go here and download jaf tool and pkey and follow the instructions on how to install it on xp
    and on vista
    http://www.dailymobile.net/forum/index.php?topic=1525.0

    download the required firmware file using NAVIFIRM tool
    http://www.dailymobile.net/forum/index.php?topic=1255.0

    make sure u have fw file and u put in directory
    C:\Program Files\Nokia\Phoenix\Products
    or
    C:\Program Files\Common Files\Nokia\DataPackage\Products

    now once ur device is connected

    go to "bb5" tab

    1. select manual flash

    now for those who have downloaded firmware file using navifirm tool just click the tab "use ini " and jaf will search for firmware file in your desktop
    OR
    for those who have flash files for a firmware ( advance users )
    press on MCU and PPM and CNT one by one and select the required flash image files.
    ( MCU: main image file, larger than other PPM: it contain language pakages CNT: it contains multimedia files )

    use either of the two ways of slecting the firmware

    2 .for normal flashing only mark "CRT 308" , "Factory Settings" , "Normal Mode" and press flash

    3.for flash dead phones only mark "Dead USB" , "Normal Mode" , "Factory Settings"and press flash then do simple 1 power on phone.



    Status LOG of Dead USB Flashing :

    Code:
    JAF version 1.98.62
    Detected PKEY: 9000A86B
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 6.86.15.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    Searching for default location of ini...
    Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-217\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-217\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_a
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_a
    APE Variant file: NONE
    Languages in ppm: English,German,Finish,Swedish,Danish,Norwegian,Ice landic
    Detected P-KEY: 9000A86B
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 06.02.002
    Elf2flash 02.33.000 RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step3...
    Sending RAW Loader...
    ...................Loader Sent!
    Stage 2 starting.......................................... .....................Loader Sent!
    Stage 3 starting..................Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 1424, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw...
    Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
    Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
    Erasing cmt zone 00020000 - 0007FFFF ... Erase result: 0000
    Erasing cmt zone 00080000 - 000DFFFF ... Erase result: 0000
    Erasing cmt zone 00100000 - 001FFFFF ... Erase result: 0000
    Erasing cmt zone 00200000 - 0031FFFF ... Erase result: 0000
    Erasing cmt zone 00320000 - 0105FFFF ... Erase result: 0000
    Erasing cmt zone 01060000 - 01067FFF ... Erase result: 0000
    Erasing cmt zone 01068000 - 0107FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_a...
    Erasing cmt zone 01080000 - 015FFFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_a...
    Erasing cmt zone 01600000 - 01FDFFFF ... Erase result: 0000
    Send CMT CFG...
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw...
    Sending CMT HASH for NOLO
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    Sending CMT HASH for UPDAPP
    Sending CMT HASH for DSP0
    Sending CMT HASH for MCUSW
    Sending CMT HASH for PMM_CONF
    Sending CMT HASH for SBIF_CONF
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_a...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_a...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: V 06.60
    21-05-08
    RM-217
    (c) Nokia.
    APESW: (null)
    VariantSW: (null)
    Prodcode: 0537631
    Done!

  2. #2
    Senior Member
    Join Date
    Dec 2008
    Posts
    1,647
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flash Your Dead 5800/any BB5 phone using JAF tool

    don't know how to thank you ...3chrees for Mufaddal Bhai...

  3. #3
    Senior Member
    Join Date
    Jan 2009
    Posts
    108
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flash Your Dead 5800/any BB5 phone using JAF tool

    i dont quite understand. which files am i supposed to select when i click on MCU PPM CNT?. when clicked, they show alot of files..

    ??

  4. #4
    mufaddal_km
    Guest

    Default Re: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by iamying
    i dont quite understand. which files am i supposed to select when i click on MCU PPM CNT?. when clicked, they show alot of files..

    ??
    well just check the tab "use ini" ..., this will make jaf read procuct code from your mobile phone, search the pc for installed fw and suggest you to choose one
    dont check mcu/ppm/cnt ...it is for manually putting firmware files
    make sure u have fw file and u put in directory
    C:\Program Files\Nokia\Phoenix\Products
    or
    C:\Program Files\Common Files\Nokia\DataPackage\Products

  5. #5
    Senior Member
    Join Date
    Jan 2009
    Posts
    142
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flash Your Dead 5800/any BB5 phone using JAF tool

    =< JAf only supports 32 bit. but my laptop uses 64-bit . how can i get it workng in my laptop. ? :S

  6. #6
    Senior Member
    Join Date
    Jan 2009
    Posts
    142
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flash Your Dead 5800/any BB5 phone using JAF tool

    oh and im on windows vista ultimate btw.

  7. #7
    nasua
    Guest

    Default Re: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by kxuxa
    =< JAf only supports 32 bit. but my laptop uses 64-bit . how can i get it workng in my laptop. ? :S
    Non of the service tools will run under 64-bit OS, you can try installing a virtual machine and install XP or Vista 32-bit in virtual machine, it works for some people.

  8. #8
    mufaddal_km
    Guest

    Default Re: Flash Your Dead 5800/any BB5 phone using JAF tool

    the next update of jaf will support 64 bit ...but i guess u will have to wait for that
    better try on some other desktop with xp or vistaq32 bit

  9. #9
    Junior Member
    Join Date
    Feb 2009
    Posts
    1
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flash Your Dead 5800/any BB5 phone using JAF tool

    Hi everybody,
    I have used this tuto to "undead" my flash dead phone.
    It was easy following step by step the tuto and it works very good.
    I'm pleased to see my phone alive !
    Thank you for this

  10. #10
    mufaddal_km
    Guest

    Default Re: Flash Your Dead 5800/any BB5 phone using JAF tool

    Hi everybody,
    I have used this tuto to "undead" my flash dead phone.
    It was easy following step by step the tuto and it works very good.
    I'm pleased to see my phone alive !
    Thank you for thi


 
Page 1 of 73 123 11 51 ... LastLast

Similar Threads

  1. Flashing your Bricked/Dead Nokia 5800 phone using Phoenix
    By ElevenX in forum Symbian S60v5 Firmware Discussion
    Replies: 596
    Last Post: 06-20-2013, 07:25 AM
  2. Guide: Nokia 5800 security code recovery after firmware flash
    By nasua in forum Symbian S60v5 Firmware Discussion
    Replies: 68
    Last Post: 03-03-2013, 04:49 AM
  3. New tool for 5800 XM : AppUIDviewer
    By picvert in forum Symbian S60v5 Apps
    Replies: 11
    Last Post: 07-10-2011, 05:27 PM
  4. Guide: Debrand your phone (Change Product Code)
    By nasua in forum Symbian S60v5 Firmware Discussion
    Replies: 106
    Last Post: 03-29-2011, 10:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •