Join Today
Enjoy an ad free experience by logging in. Not a member yet? Register.
Page 67 of 73 FirstFirst ... 17576566676869 ... LastLast
Results 661 to 670 of 729
  1. #661
    Junior Member
    Join Date
    Apr 2011
    Posts
    6
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Original Nokia V 52.07

  2. #662
    Senior Member
    Join Date
    Oct 2009
    Posts
    7,977
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by wazaki
    Original Nokia V 52.07
    well, the firmware you want to flash is based on v51. it's very risky to downgrade as there is a 99% you will brick your device.

    you better find a custom firmware that is based on the v52 or ported c6 with v52 core.

  3. #663
    Junior Member
    Join Date
    Apr 2011
    Posts
    18
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by sjerm
    Hi

    I tried to flash my RM-593 Nuron 5230 from 12.2.082 to 20.2.098 + RedX CFW

    After doing it my phone stayed in local mode and then bricked

    I tried reflashing with both version 20.2.098 and 12.2.082 but it doesnt work
    here is the log for 12.2.082
    JAF version 1.98.62
    Detected PKEY: 90009699
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.27.0
    Changing mode...Done!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Reading...
    Failed! Aborting!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...

    Failed! Aborting!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00
    PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.rofs2.V17
    CNT Flash file: NONE
    APE Variant file: NONE
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00
    PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.rofs2.V17
    CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082.343.02.rofs3.fpsx
    APE Variant file: NONE
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00
    PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.rofs2.V17
    CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082.343.02.rofs3.fpsx
    APE Variant file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM593_12.2.082_001_U343.uda.fpsx
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..........PUBKEYS already sent...
    .......Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 561, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.rofs2.V17...
    Erasing cmt zone 06D60000 - 08D5FFFF ... Erase result: 0000
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082.343.02.rofs3.fpsx...
    Erasing cmt zone 08D60000 - 09E5FFFF ... Erase result: 0000
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM593_12.2.082_001_U343.uda.fpsx...
    Erasing cmt zone 09E60000 - 0F47FFFF ... Erase result: 0000
    Send CMT CFG...

    Writing cmt...
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.rofs2.V17...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082.343.02.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM593_12.2.082_001_U343.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    Phone not found...
    Second try...
    MCUSW: (null)
    APESW: (null)
    VariantSW: (null)
    Prodcode:
    Done!
    Changing mode...Done!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..........PUBKEYS already sent...
    .......Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 561, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.rofs2.V17...
    Erasing cmt zone 06D60000 - 08D5FFFF ... Erase result: 0000
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082.343.02.rofs3.fpsx...
    Erasing cmt zone 08D60000 - 09E5FFFF ... Erase result: 0000
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM593_12.2.082_001_U343.uda.fpsx...
    Erasing cmt zone 09E60000 - 0F47FFFF ... Erase result: 0000
    Send CMT CFG...

    Writing cmt...
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.rofs2.V17...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082.343.02.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM593_12.2.082_001_U343.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    Phone not found...
    Second try...
    MCUSW: (null)
    APESW: (null)
    VariantSW: (null)
    Prodcode:
    Done!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..........PUBKEYS already sent...
    .......Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 561, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.rofs2.V17...
    Erasing cmt zone 06D60000 - 08D5FFFF ... Erase result: 0000
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082.343.02.rofs3.fpsx...
    Erasing cmt zone 08D60000 - 09E5FFFF ... Erase result: 0000
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM593_12.2.082_001_U343.uda.fpsx...
    Erasing cmt zone 09E60000 - 0F47FFFF ... Erase result: 0000
    Send CMT CFG...

    Writing cmt...
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082_prd.rofs2.V17...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM-593_12.2.082.343.02.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files (x86)\Nokia\Phoenix\Products\RM-593\RM593_12.2.082_001_U343.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    Phone not found...
    Done!


    at the end when it trys pooling phone it says "Phone didnt respond"

    same problem ;(

  4. #664
    Junior Member
    Join Date
    Jul 2010
    Posts
    8
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    guys..
    my n97 v22.0.110 product code is "058xxxx"
    note: i changed my product code before to 057xxxx so that i can update to v22.0.110

    Now I download the OFW v22.0.110 from Navifirm the product code is "057xxxx"

    should I change my product code to match the product code in Navifirm OFW before flashing?

  5. #665
    Senior Member
    Join Date
    Oct 2009
    Posts
    7,977
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by puchuub
    guys..
    my n97 v22.0.110 product code is "058xxxx"
    note: i changed my product code before to 057xxxx so that i can update to v22.0.110

    Now I download the OFW v22.0.110 from Navifirm the product code is "057xxxx"

    should I change my product code to match the product code in Navifirm OFW before flashing?
    it's not required but you can obviously change it if you want to.

  6. #666
    Junior Member
    Join Date
    Jul 2010
    Posts
    8
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by oreo27
    it's not required but you can obviously change it if you want to.
    thanks (^_^)..

  7. #667
    Senior Member
    Join Date
    Oct 2009
    Posts
    7,977
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by puchuub
    thanks (^_^)..
    sure man.

  8. #668
    Junior Member
    Join Date
    May 2011
    Posts
    4
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    cant make emei backup using pm field 208?

    if i choose to continue backing up crt failed appear

    is it still safe to continue?

  9. #669
    Senior Member
    Join Date
    Oct 2009
    Posts
    7,977
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by rushipatel90
    cant make emei backup using pm field 208?

    if i choose to continue backing up crt failed appear

    is it still safe to continue?
    untick crt 308.

  10. #670
    Member
    Join Date
    May 2011
    Posts
    32
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    HELP!!!!!!!MY PHONE IS DEAD
    i was trying to install a custom firmware on my 5233.and when flashin come to end while pooling phone my phone stopped responding....
    it's not starting... PLEASE HELP!!!!!!!!!!!


 
Page 67 of 73 FirstFirst ... 17576566676869 ... LastLast

Similar Threads

  1. Flashing your Bricked/Dead Nokia 5800 phone using Phoenix
    By ElevenX in forum Symbian S60v5 Firmware Discussion
    Replies: 596
    Last Post: 06-20-2013, 07:25 AM
  2. Guide: Nokia 5800 security code recovery after firmware flash
    By nasua in forum Symbian S60v5 Firmware Discussion
    Replies: 68
    Last Post: 03-03-2013, 05:49 AM
  3. New tool for 5800 XM : AppUIDviewer
    By picvert in forum Symbian S60v5 Apps
    Replies: 11
    Last Post: 07-10-2011, 05:27 PM
  4. Guide: Debrand your phone (Change Product Code)
    By nasua in forum Symbian S60v5 Firmware Discussion
    Replies: 106
    Last Post: 03-29-2011, 10:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •