Join Today
Enjoy an ad free experience by logging in. Not a member yet? Register.
Page 4 of 73 FirstFirst ... 234561454 ... LastLast
Results 31 to 40 of 729
  1. #31
    Junior Member
    Join Date
    Mar 2009
    Posts
    8
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    [quote=mufaddal_km ]
    USE THIS MOD AT YOUR OWN RISK.

    TRY THIS ONLY IF U ARE NOT ABLE TO FLASH WITH PHOENIX

    this guide will explain how to flash your dead nokia phone using jaf tool ...
    this guide is especially for those who have trouble installing phoenix on their sytems or those who cant revive their phones using phoenix

    especially for windows vista users as phoenix deesnt support vista officially `and jaf tool has support for windows vista 32 bit omly

    go here and download jaf tool and pkey and follow the instructions on how to install it on xp
    and on vista
    http://www.dailymobile.net/forum/index.php?topic=1525.0

    download the required firmware file using NAVIFIRM tool
    http://www.dailymobile.net/forum/index.php?topic=1255.0

    make sure u have fw file and u put in directory
    C:\Program Files\Nokia\Phoenix\Products
    or
    C:\Program Files\Common Files\Nokia\DataPackage\Products

    now once ur device is connected

    go to "bb5" tab

    1. select manual flash

    now for those who have downloaded firmware file using navifirm tool just click the tab "use ini " and jaf will search for firmware file in your desktop
    OR
    for those who have flash files for a firmware ( advance users )
    press on MCU and PPM and CNT one by one and select the required flash image files.
    ( MCU: main image file, larger than other PPM: it contain language pakages CNT: it contains multimedia files )

    use either of the two ways of slecting the firmware

    2 .for normal flashing only mark "CRT 308" , "Factory Settings" , "Normal Mode" and press flash

    3.for flash dead phones only mark "Dead USB" , "Normal Mode" , "Factory Settings"and press flash then do simple 1 power on phone.



    Status LOG of Dead USB Flashing :

    Code:
    JAF version 1.98.62
    Detected PKEY: 9000A86B
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 6.86.15.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    Searching for default location of ini...
    Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-217\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: C:\Program Files\Common Files\Nokia\DataPackage\Products\RM-217\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-217\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_a
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_a
    APE Variant file: NONE
    Languages in ppm: English,German,Finish,Swedish,Danish,Norwegian,Ice landic
    Detected P-KEY: 9000A86B
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 06.02.002
    Elf2flash 02.33.000 RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step3...
    Sending RAW Loader...
    ...................Loader Sent!
    Stage 2 starting.......................................... .....................Loader Sent!
    Stage 3 starting..................Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 1424, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw...
    Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
    Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
    Erasing cmt zone 00020000 - 0007FFFF ... Erase result: 0000
    Erasing cmt zone 00080000 - 000DFFFF ... Erase result: 0000
    Erasing cmt zone 00100000 - 001FFFFF ... Erase result: 0000
    Erasing cmt zone 00200000 - 0031FFFF ... Erase result: 0000
    Erasing cmt zone 00320000 - 0105FFFF ... Erase result: 0000
    Erasing cmt zone 01060000 - 01067FFF ... Erase result: 0000
    Erasing cmt zone 01068000 - 0107FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_a...
    Erasing cmt zone 01080000 - 015FFFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_a...
    Erasing cmt zone 01600000 - 01FDFFFF ... Erase result: 0000
    Send CMT CFG...
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.mcusw...
    Sending CMT HASH for NOLO
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    Sending CMT HASH for UPDAPP
    Sending CMT HASH for DSP0
    Sending CMT HASH for MCUSW
    Sending CMT HASH for PMM_CONF
    Sending CMT HASH for SBIF_CONF
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.ppm_a...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-217\rm217__06.60.image_a...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: V 06.60
    21-05-08
    RM-217
    (c) Nokia.
    APESW: (null)
    VariantSW: (null)
    Prodcode: 0537631
    Done



    thanks sir but help me with this i have nokia n-79 dead i tried your way and now it gives me this msg in the end.

    JAF version 1.98.62
    Detected PKEY: 90009699
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.0.2.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-350\

    Searching for default location of ini...
    Checking path: \Products\RM-350\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-350\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: \Products\RM-350\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-350\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_prd.core.fpsx
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_V3_019_prd.rofs2.fpsx
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_53.1_prd.customer.fpsx
    APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_016_000_U001.uda.fpsx
    Backing up CRT...
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Reading IMEI...
    Failed! Aborting!
    Failed to backup CRT...
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 007.016.022
    Elf2flash 08.20.000
    CMT RAW loader...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..............Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 525, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_prd.core.fpsx...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 0A95FFFF ... Erase result: 0100
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_V3_019_prd.rofs2.fpsx...
    Erasing cmt zone 08260000 - 09F5FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_53.1_prd.customer.fpsx...
    Erasing cmt zone 09F60000 - 0A95FFFF ... Erase result: 0100
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_016_000_U001.uda.fpsx...
    Erasing cmt zone 0A960000 - 0F71FFFF ... Erase result: 0000
    Send CMT CFG...

    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_prd.core.fpsx...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_V3_019_prd.rofs2.fpsx...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_53.1_prd.customer.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-350\RM-350_11.049_016_000_U001.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: V ICPR72_08w44.1
    24-11-08
    RM-350
    (c) Nokia
    APESW: 11.049
    VariantSW: 11.049
    Prodcode: 0556094
    Setting test mode...
    Failed! Aborting!
    Done!

  2. #32
    mufaddal_km
    Guest

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    read my previuos post

  3. #33
    Junior Member
    Join Date
    Mar 2009
    Posts
    8
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by mufaddal_km
    read my previuos post
    i did sir but pl help me i did as you said in your post but still same problem.
    at the end it gives me msg

    setting test mode
    failed aborting
    done

    pl tell me what is wrong with this?

  4. #34
    mufaddal_km
    Guest

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    bro just disconnect the phone from usb and switch it on...thats it

  5. #35
    Junior Member
    Join Date
    Mar 2009
    Posts
    8
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by mufaddal_km
    bro just disconnect the phone from usb and switch it on...thats it
    sir i did that but when i switch it on it gives me only nokia and that too lcd flashing three times and then switch off itself.

  6. #36
    mufaddal_km
    Guest

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    ok try with phoenix then ..
    i have attched guide
    make sure u uninstall pc suite completely before installing phoenix

  7. #37
    Junior Member
    Join Date
    Mar 2009
    Posts
    8
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by mufaddal_km
    ok try with phoenix then ..
    i have attched guide
    make sure u uninstall pc suite completely before installing phoenix
    THANKS SIR
    pl also tell me what version to use with cause i have used phoenix once but that didnt detect my phone and also which files to use to flash ?
    are these same files which i downloded from navifirm or some different files and also where can i find phoenix the one you are talking about
    your help will be appreciable.

  8. #38
    mufaddal_km
    Guest

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool


  9. #39
    Junior Member
    Join Date
    Mar 2009
    Posts
    8
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    sir i have tried above given link but cant download phoenix
    but once i already tried phoenix that gave me error
    NEITHER DP1.0 NOR DP2.0 FOUND PRODUCT CANT BE DETECTED
    WHAT IS THAT
    ALSO PL TELL ME THAT IF I CAN FLASH RM-350 WITH RM-348 IS IT OKAY TO TRY OR NOT PL HELP ME.

  10. #40
    mufaddal_km
    Guest

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    download phoenix from here
    also make sure u have uninstalled pc suite completely

    http://www.dailymobile.net/forum/ind...pic,995.0.html

    which rm version ur phone is
    flash ur phoen with same rm version


 
Page 4 of 73 FirstFirst ... 234561454 ... LastLast

Similar Threads

  1. Flashing your Bricked/Dead Nokia 5800 phone using Phoenix
    By ElevenX in forum Symbian S60v5 Firmware Discussion
    Replies: 596
    Last Post: 06-20-2013, 07:25 AM
  2. Guide: Nokia 5800 security code recovery after firmware flash
    By nasua in forum Symbian S60v5 Firmware Discussion
    Replies: 68
    Last Post: 03-03-2013, 05:49 AM
  3. New tool for 5800 XM : AppUIDviewer
    By picvert in forum Symbian S60v5 Apps
    Replies: 11
    Last Post: 07-10-2011, 05:27 PM
  4. Guide: Debrand your phone (Change Product Code)
    By nasua in forum Symbian S60v5 Firmware Discussion
    Replies: 106
    Last Post: 03-29-2011, 10:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •