Join Today
Enjoy an ad free experience by logging in. Not a member yet? Register.
Page 32 of 73 FirstFirst ... 22303132333442 ... LastLast
Results 311 to 320 of 729
  1. #311
    Junior Member
    Join Date
    Jan 2010
    Posts
    1
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Thank you very much. My mobile is alive!!!

  2. #312
    Junior Member
    Join Date
    Jan 2010
    Posts
    1
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    I tried using the 2009 version of Phoenix to flash my DEAD Nokia N75-3 RM-128 phone but it didn't work. I tried your method but my phone cannot be found. Here's the log:

    JAF version 1.98.62
    Detected PKEY: 9000A6B5
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.17.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-128\

    Searching for default location of ini...
    Checking path: \Products\RM-128\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-128\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: \Products\RM-128\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-128\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-128\RM128_20.1.172_prd.C00
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-128\V3RM128_20.1.172_prd.V71
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-128\RM128_20.1.172.4.U71
    APE Variant file: NONE
    Detected P-KEY: 9000A6B5
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Not found!!!

    O_O pls. help.
    I'm using the Nokia Cable Type: CA-53
    do I need FBUS does it have to do anything with the USB at all or it's something else.

    P.S. I've flashed my phone in some store in Philippines and for a few days it worked fine..but now it died again pls. help

    Regards,
    -L

  3. #313
    Junior Member
    Join Date
    Nov 2009
    Posts
    2
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by rahasif
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_30.0.011_prd.core.C00
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_30.0.011_prd.rofs2.V06
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_30.0.011.310.04.rofs3.fpsx
    APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_30.0.011.udaerase.fpsx
    Languages in ppm: English,Czech,Slovakian,German,Polish,Hungarian
    Backing up CRT...
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Reading IMEI...
    C:\Program Files\ODEON\JAF\ProgData\354216034794747_CRT_backu p_96199.pm
    Done!
    Backup CRT OK!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Searching for phone...Found
    Reading SW version...ICPR72_09w20.5 30.0.011
    Reading battery value...3838 mV
    Init usb flashing...
    Reading flashid...
    CMT: 004000EC <=> SAMSUNG (SEC) -> KAT00F00RA
    APE: 00000000 <=> Flash -> not detected
    Verifing ADL communication... Status byte 7
    Rebooting to flash mode...
    Waiting for the phone to reboot...
    Searching for phone...
    Phone rebooted but not in flash mode...


    What should i do now?
    I ended up with this too. phone rebooted but not in flash mode. We need help! Please

  4. #314
    Senior Member
    Join Date
    Feb 2009
    Posts
    297
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by toondewachter
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.008.003
    Elf2flash 09.14.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..........Error booting phone...


    Please help! Nobody has answered this yet...
    pull ur battery out for couple seconds and put it back in and try to reflash it. i get that when i just shutdown my phone before flashing and when i pull the battery out and pop it back it in it flashed.

  5. #315
    Junior Member
    Join Date
    Nov 2009
    Posts
    12
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Guide: Flash Your Dead 5800/any BB5 phone using JAF tool

    Quote Originally Posted by Vadimk
    So, I tried flashing my phone to firmware v31.0.101 using the 1st method (phone is not flash dead). Anyways I get this far... and than the phone just turns off and JAF is stuck at that last step.


    JAF version 1.98.62
    Detected PKEY: 90009699
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.20.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-356\

    Searching for default location of ini...
    Checking path: \Products\RM-356\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-356\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: \Products\RM-356\
    Checking path: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-356\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-356\RM-356_31.0.101_prd.core.C00
    PPM Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-356\RM-356_31.0.101_prd.rofs2.V08
    CNT Flash file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-356\RM-356_31.0.101_C02_prd.rofs3.fpsx
    APE Variant file: C:\Program Files (x86)\Nokia\Phoenix\Products\RM-356\RM356_31.0.008_020_xxx_U01.uda.fpsx
    Languages in ppm: English,Hebrew,Arabic,Russian,Spanish
    Backing up CRT...
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Reading IMEI...
    C:\Program Files (x86)\ODEON\JAF\ProgData\356910034252692_CRT_backu p_16141511.pm
    Done!
    Backup CRT OK!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Searching for phone...Found
    Reading SW version...ICPR72_09w20.5 30.0.011
    Reading battery value...3773 mV
    Init usb flashing...
    Reading flashid...
    CMT: 004000EC <=> SAMSUNG (SEC) -> KAT00F00RA
    APE: 00000000 <=> Flash -> not detected
    Verifing ADL communication... Status byte 7
    Rebooting to flash mode...
    Waiting for the phone to reboot...
    Searching for phone...
    Sending RAW loader...
    Using 009.008.003
    Elf2flash 09.14.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting.................


    Phone is not dead and works fully when I power it back on. It just never finishes flashing... Thanks in advance for any help.
    I am having the exact same problem.Can anyone help??
    I am running JAF on windows 7 x86 in xp sp3 compatibility mode and the fone is not bricked..

  6. #316
    Junior Member
    Join Date
    Dec 2009
    Posts
    21
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Should I just bury it?

    I think I should bury it ;[ I had the phone for like 20 days but i dont have a waranty and this guy that said that he could fix it want too much money

    he said the circuits were fryed. i tought ill give it a try but as u can see in the JAF log looks like he cant write anything on the phone



    Code:
    JAF
    
    JAF version 1.98.62
    Detected PKEY: 90009699
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.17.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
    
    Searching for default location of ini...
    Checking path: \Products\RM-356\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: \Products\RM-356\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx
    APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx
    Languages in ppm: English,German,Croatian,Serbian,Greek
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Not found!!!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..................PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    ...........Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 609, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Erasing cmt zone 07060000 - 0915FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Erasing cmt zone 09160000 - 09E5FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx...
    Erasing cmt zone 09E60000 - 0F71FFFF ... Erase result: 0000
    Send CMT CFG...
    
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*ENO
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    Phone not found...
    Done!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..................PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    ...........Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 609, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Erasing cmt zone 07060000 - 0915FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Erasing cmt zone 09160000 - 09E5FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx...
    Erasing cmt zone 09E60000 - 0F71FFFF ... Erase result: 0000
    Send CMT CFG...
    
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*ENO
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: (null)
    APESW: (null)
    VariantSW: (null)
    Prodcode:
    Setting test mode...
    Failed! Aborting!
    Done! 
    
    PHOENIX
    
    Flashing started
    Creating product data items list
    Product data items list created
    Backup
    not required
    Flashing phone
    Initializing
    Scanning image files...
    Waiting for USB device...
    1. Make sure USB cable, Battery and charger are removed from device.
    2. Insert USB cable to device
    3. Insert Battery to device
    4. Insert Charger to device
    --- Press phone's power button! ---
    Loading secondary boot code: 15232 bytes
    Secondary boot loaded
    Loading update server code: 2861775 bytes
    Update server loaded
    Asic CMT: Verifying communication to device...
    Asic CMT: Verifying communication to device...
    Asic CMT: Start programming 131828 KB...
    Asic CMT: Partitioning RM-356_40.0.005_prd.core.C00
    Asic CMT: Partitioning area 1...
    Asic CMT: Erasing RM-356_40.0.005_prd.core.C00
    Asic CMT: Erasing area 1...
    Asic CMT: Erasing area 2...
    Asic CMT: Erasing area 3...
    Asic CMT: Erasing area 4...
    Asic CMT: Erasing area 5...
    Asic CMT: Erasing partition 0x0000000A...
    Asic CMT: Erasing RM-356_40.0.005_prd.rofs2.V07
    Asic CMT: Erasing area 1...
    Asic CMT: Erasing RM-356_40.0.005_C02_prd.rofs3.fpsx
    Asic CMT: Erasing area 1...
    Asic CMT: Erasing RM356_40.0.005_023_xxx_U01.uda.fpsx
    Asic CMT: Erasing area 1...
    Asic CMT: Programming RM-356_40.0.005_prd.core.C00
    Asic CMT: Programming 0%
    Asic CMT: Programming 2%
    Asic CMT: Programming 4%
    Asic CMT: Programming 6%
    Asic CMT: Programming 8%
    Asic CMT: Programming 10%
    Asic CMT: Programming 12%
    Asic CMT: Programming 14%
    Asic CMT: Programming 16%
    Asic CMT: Programming 18%
    Asic CMT: Programming 20%
    Asic CMT: Programming 22%
    Asic CMT: Programming 24%
    Asic CMT: Programming 26%
    Asic CMT: Programming 28%
    Asic CMT: Programming 30%
    Asic CMT: Programming 32%
    Asic CMT: Programming 34%
    Asic CMT: Programming 36%
    Asic CMT: Programming 38%
    Asic CMT: Programming 40%
    Asic CMT: Programming 42%
    Asic CMT: Programming 44%
    Asic CMT: Programming 46%
    Asic CMT: Programming 48%
    Asic CMT: Programming 50%
    Asic CMT: Programming 52%
    Asic CMT: Programming 54%
    Asic CMT: Programming 56%
    Asic CMT: Programming 58%
    Asic CMT: Programming 60%
    Asic CMT: Programming 62%
    Asic CMT: Programming 64%
    Asic CMT: Programming 66%
    Asic CMT: Programming 68%
    Asic CMT: Programming 70%
    Asic CMT: Programming 72%
    Asic CMT: Programming 74%
    Asic CMT: Programming 76%
    Asic CMT: Programming 78%
    Asic CMT: Programming RM-356_40.0.005_prd.rofs2.V07
    Asic CMT: Programming 80%
    Asic CMT: Programming 82%
    Asic CMT: Programming 84%
    Asic CMT: Programming 86%
    Asic CMT: Programming 88%
    Asic CMT: Programming 90%
    Asic CMT: Programming 92%
    Asic CMT: Programming 94%
    Asic CMT: Programming 96%
    Asic CMT: Programming 98%
    Asic CMT: Programming RM-356_40.0.005_C02_prd.rofs3.fpsx
    Asic CMT: Programming RM356_40.0.005_023_xxx_U01.uda.fpsx
    Asic CMT: Verifying communication to device...
    Waiting for communication response: 25
    Waiting for communication response: 24
    Waiting for communication response: 23
    Waiting for communication response: 22
    Waiting for communication response: 21
    Waiting for communication response: 20
    Waiting for communication response: 19
    Waiting for communication response: 18
    Waiting for communication response: 17
    Waiting for communication response: 16
    Waiting for communication response: 15
    Waiting for communication response: 14
    Waiting for communication response: 13
    Waiting for communication response: 12
    Waiting for communication response: 11
    Waiting for communication response: 10
    Waiting for communication response: 9
    Waiting for communication response: 8
    Waiting for communication response: 7
    Waiting for communication response: 6
    Waiting for communication response: 5
    Waiting for communication response: 4
    Waiting for communication response: 3
    Waiting for communication response: 2
    Waiting for communication response: 1
    Error 0x84009427 communicating to phone. Unable to verify comm.
    Warning: Unable to communicate to product after flashing
    All operations completed
    Product flashing failed.
    
    The flashing failed. Do you like to retry the flashing?
    
    HRESULT 0x8401f153 (-2080247469)
    
    Unable to get error message

  7. #317
    Junior Member
    Join Date
    Dec 2009
    Posts
    21
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Should I just bury it?

    Some changes appeared

    Code:
    JAF version 1.98.62
    Detected PKEY: 90009699
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.17.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
    
    Searching for default location of ini...
    Checking path: \Products\RM-356\
    Searching for JAF saved location of ini...
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
    Scanning ini files...
    Searching for default location of ini...
    Checking path: \Products\RM-356\
    Checking path: C:\Program Files\Nokia\Phoenix\Products\RM-356\
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx
    APE Variant file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx
    Languages in ppm: English,German,Croatian,Serbian,Greek
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Not found!!!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
      Elf2flash 09.11.000
      CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..................PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    ...........Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 609, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Erasing cmt zone 07060000 - 0915FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Erasing cmt zone 09160000 - 09E5FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx...
    Erasing cmt zone 09E60000 - 0F71FFFF ... Erase result: 0000
    Send CMT CFG...
    
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... 
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*ENO
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    Phone not found...
    Done!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
      Elf2flash 09.11.000
      CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..................PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    ...........Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 609, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Erasing cmt zone 07060000 - 0915FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Erasing cmt zone 09160000 - 09E5FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx...
    Erasing cmt zone 09E60000 - 0F71FFFF ... Erase result: 0000
    Send CMT CFG...
    
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... 
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*ENO
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM356_40.0.005_023_xxx_U01.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: (null)
    APESW: (null)
    VariantSW: (null)
    Prodcode: 
    Setting test mode...
    Failed! Aborting!
    Done!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx
    APE Variant file: NONE
    Languages in ppm: English,German,Croatian,Serbian,Greek
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
      Elf2flash 09.11.000
      CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step2...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting..................PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    PUBKEYS already sent...
    ...........Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 608, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
    Partition result: 0014
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Erasing cmt zone 07060000 - 0915FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Erasing cmt zone 09160000 - 09E5FFFF ... Erase result: 0000
    Send CMT CFG...
    
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.core.C00...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending... 
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    cmt->PAPUB keys already sent...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*ENO
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_prd.rofs2.V07...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-356\RM-356_40.0.005_C02_prd.rofs3.fpsx...
    Sending CMT HASH for SOS+ROFS3
    Write result 27: 1701
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: (null)
    APESW: (null)
    VariantSW: (null)
    Prodcode: 
    Setting test mode...
    Failed! Aborting!
    Done!

  8. #318
    Senior Member
    Join Date
    Feb 2009
    Posts
    297
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Should I just bury it?

    Are you flashing in Dead mode and what operating system are you running?

  9. #319
    Junior Member
    Join Date
    Dec 2009
    Posts
    21
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Should I just bury it?

    Quote Originally Posted by 5800XM_User
    Are you flashing in Dead mode and what operating system are you running?
    Yep here is the pic of the

    http://i50.tinypic.com/29etbte.png

    And im using W7 Ultimate 32bit running JAF with compatibility mode for XPSP2

  10. #320
    Senior Member
    Join Date
    Feb 2009
    Posts
    297
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Should I just bury it?

    try unchecking factory settings & flash it again


 
Page 32 of 73 FirstFirst ... 22303132333442 ... LastLast

Similar Threads

  1. Flashing your Bricked/Dead Nokia 5800 phone using Phoenix
    By ElevenX in forum Symbian S60v5 Firmware Discussion
    Replies: 596
    Last Post: 06-20-2013, 07:25 AM
  2. Guide: Nokia 5800 security code recovery after firmware flash
    By nasua in forum Symbian S60v5 Firmware Discussion
    Replies: 68
    Last Post: 03-03-2013, 05:49 AM
  3. New tool for 5800 XM : AppUIDviewer
    By picvert in forum Symbian S60v5 Apps
    Replies: 11
    Last Post: 07-10-2011, 05:27 PM
  4. Guide: Debrand your phone (Change Product Code)
    By nasua in forum Symbian S60v5 Firmware Discussion
    Replies: 106
    Last Post: 03-29-2011, 10:11 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •