Join Today
Enjoy an ad free experience by logging in. Not a member yet? Register.
Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22
  1. #21
    Junior Member
    Join Date
    Apr 2011
    Posts
    13
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: HELP (Not Starting my 5233 after flashing using JAF)

    Quote Originally Posted by vpurve
    Hey listen,
    I also got the same problem, but I solved the same problem.
    The problem was pooling the phone not done.
    It is mainly due to downgrading.
    Download RM-625 v50 the latest one firmware and copy it to C:\\Program Files\Nokia\Phoenix\Products\RM-625 folder.

    Now in start jaf pkey emulator. click go.

    untick all and tick manual flash, tick dead usb.
    Switch off your phone and connect with usb.
    Now tick use inr

    wait for 10 seconds now click on 5232/5233 cable in drop down list.
    now click on Flash and imidietly just press switch on button once. dont keep it pressing.

    Now everything goes fine.
    If you have any problem call me 07359526325, I will help you

    Vishal
    i had the same problem of failing start up after flashing with cfw.
    I have flashed my Nokia5233 v50 by a CFW(rofs2 and core by binh24) with JAF and everything completed fine and aftr pooling and shows done in JAF. But the phone try to startup, shows NOKIA logo and switch off...... when switch on for the next time it repeats the same...
    I hadn't changed the name of any file which i dwnlded and kept my orginal rofs3 with other 7 files in C:\Program Files\Nokia\Phoenix\Products\RM-625
    What's the prob with me.......

  2. #22
    Junior Member
    Join Date
    Nov 2011
    Posts
    3
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: HELP (Not Starting my 5233 after flashing using JAF)

    hey guys 1st i flashed my 5233 rm625 with velocity and now i ws bored so wn i ws trying to flash to original fw

    JAF version 1.98.62
    Detected PKEY: 90009699
    Card life counter: 99.99%
    P-key nokia module version 01.02
    FBUS INTERFACE NOT CONNECTED!!!
    USB Cable Driver version: 7.1.69.0
    Changing mode...Done!
    FILES SET FOR FLASHING:
    MCU Flash file: NONE
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: E:\nokia original\RM-625_50.1.001_prd.core.C0r
    PPM Flash file: NONE
    CNT Flash file: NONE
    APE Variant file: NONE
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: E:\nokia original\RM-625_50.1.001_prd.core.C0r
    PPM Flash file: E:\nokia original\RM-625_50.1.001_prd.rofs2.V21
    CNT Flash file: NONE
    APE Variant file: NONE
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Phone Type:
    FILES SET FOR FLASHING:
    MCU Flash file: E:\nokia original\RM-625_50.1.001_prd.core.C0r
    PPM Flash file: E:\nokia original\RM-625_50.1.001_prd.rofs2.V21
    CNT Flash file: NONE
    APE Variant file: E:\nokia original\RM625_50.1.001_000_000_U001.uda.fpsx
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Found
    Sending RAW loader...
    Using 009.012.005
    Elf2flash 09.11.000
    CMT RAW loader...
    Patching RAW boot step1...
    Patching RAW boot step3...
    Sending RAW Loader...
    ....................Loader Sent!
    Stage 2 starting............PUBKEYS already sent...
    PUBKEYS already sent...
    ........Phone prepared OK!
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 538, APE blocks: 0
    Erasing cmt...
    Processing E:\nokia original\RM-625_50.1.001_prd.core.C0r...
    Erasing cmt zone 00040000 - 00082FFF ... Erase result: 0000
    Erasing cmt zone 00083400 - 003FFFFF ... Erase result: 0000
    Erasing cmt zone 00400000 - 007FFFFF ... Erase result: 0000
    Erasing cmt zone 00800000 - 00D5FFFF ... Erase result: 0000
    Erasing cmt zone 00D60000 - 09E5FFFF ... Erase result: 0000
    Partition result: 0014
    Processing E:\nokia original\RM-625_50.1.001_prd.rofs2.V21...
    Erasing cmt zone 06CE0000 - 0915FFFF ... Erase result: 0000
    Processing E:\nokia original\RM625_50.1.001_000_000_U001.uda.fpsx...
    Erasing cmt zone 09E60000 - 0F47FFFF ... Erase result: 0000
    Send CMT CFG...

    Writing cmt...
    Processing E:\nokia original\RM-625_50.1.001_prd.core.C0r...
    Sending CMT HASH for ADA
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for RAP3NAND
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    Sending CMT HASH for SOS*UPDAPP
    Sending CMT HASH for SOS*ENO
    Sending CMT HASH for SOS*DSP0
    Sending CMT HASH for SOS*ISASW
    Sending CMT HASH for SOS+CORE
    Sending CMT HASH for SOS+ROFS1
    Processing E:\nokia original\RM-625_50.1.001_prd.rofs2.V21...
    Sending CMT HASH for SOS+ROFS2
    Write result 27: 1701
    Processing E:\nokia original\RM625_50.1.001_000_000_U001.uda.fpsx...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    Phone not found...
    Done!

    all this happend
    n now wn im trying to switch on just the fone vibrates once n thn nothing comes not evn the light comes
    pls any one please hlp me . i beg pls !!!!!!!!!!!


 
Page 3 of 3 FirstFirst 123

Similar Threads

  1. Any MOD to increase loudspeaker volume of 5233 ?
    By anitapankaj21 in forum Symbian S60V5 Modding
    Replies: 4
    Last Post: 10-19-2012, 06:38 PM
  2. Difference b/w nokia 5230 and 5233?
    By tshrjain in forum Symbian S60v5 Forum
    Replies: 26
    Last Post: 03-11-2011, 12:55 PM
  3. 5233 121.092.c01.01 cfw
    By pankajkukar in forum Symbian S60V5 Custom Firmware / Cooking - Discussion
    Replies: 3
    Last Post: 06-24-2010, 02:25 AM
  4. Starting programming for the 5800
    By Panathas in forum Symbian S60v5 Forum
    Replies: 6
    Last Post: 10-29-2009, 10:45 AM
  5. App not starting in 5800
    By Silencer23 in forum Symbian S60v5 Forum
    Replies: 4
    Last Post: 06-14-2009, 02:41 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •