Join Today
Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Member
    Join Date
    May 2011
    Posts
    51
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Flashing S40 Phones Using JAF with USB

    I created this thread because i found it difficult than flashing a symbian phone. I tried to flash my Nokia 2690 using JAF with the help of USB only not any UFS Box. So whenever i tried i failed, as i followed the symbian method of flashing. i.e
    • Tick Manual Flash
    • Tick Dead USB
    • Tick Normal Mode
    • Untick CRT
    • Use INI

    But it doesn't detect the flash files using INI.
    So i failed every time after selecting the files manually. But at last i got sucess.
    Here is what i did and got succes. Remember I googled a lot for any tutorial, but there was nothing like this.
    So i tried my luck as i haven't got too much knowledge about this subject. It was a risk. But it got right.
    The only thing i did is
    • Switch on your Phone
    • Insert The charger PIN
    • Tick Manual Flash
    • Untick Dead USB
    • Tick Normal Mode
    • Untick CRT
    • Select the files manually
    • CLICK ON FLASH

    That's it! Flashing process will start now.....
    Here is the log of my Flashing process. It took about 8-9 minutes

    FILES SET FOR FLASHING:
    MCU Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-635\rm635__10.10.mcusw
    PPM Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-635\rm635__10.10.ppm_m_c
    CNT Flash file: C:\Program Files\Nokia\Phoenix\Products\RM-635\rm635__10.10.image_m_c_blue
    APE Variant file: NONE
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    PRESS POWER ON NOW!
    Searching for phone...Not found!!!
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Searching for phone...Found
    Reading SW version...10.10
    Reading battery value...3688 mV
    Battery level is too low...Please make full charge and try again!( Insert Charger PIN to avoid this message)
    Detected P-KEY: 90009699
    P-key nokia module version 01.02
    Init usb communication...
    Searching for phone...Found
    Reading SW version...10.10
    Reading battery value...3929 mV
    Init usb flashing...
    Reading flashid...
    CMT: 89820089 <=> INTEL -> Type not in database
    APE: 00000000 <=> Flash -> not detected
    Verifing ADL communication... Status byte 2
    Scanning selected flash files...
    Found CMT ULO server in flash file...
    ADL->Loader: Update Application Loader -> Single Chip
    Loader len: 300160, CHK: 0x410C
    ADL -> Sending loader...
    ...
    Waiting for the phone to boot...
    Searching for phone...
    Status byte: 8000
    Selecting CMT flash...
    Result: 0000
    Phone is in flash mode...
    CMT blocks: 1771, APE blocks: 0
    Erasing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-635\rm635__10.10.mcusw...
    Erasing cmt zone 00000000 - 000006BF ... Erase result: 0000
    Erasing cmt zone 000006C0 - 0001FFFF ... Erase result: 0000
    Erasing cmt zone 00040000 - 000BFFFF ... Erase result: 0000
    Erasing cmt zone 000C0000 - 0013FFFF ... Erase result: 0000
    Erasing cmt zone 00140000 - 0137FFFF ... Erase result: 0000
    Erasing cmt zone 01380000 - 0151FFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-635\rm635__10.10.ppm_m_c...
    Erasing cmt zone 01520000 - 01DBFFFF ... Erase result: 0000
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-635\rm635__10.10.image_m_c_blue...
    Erasing cmt zone 01DC0000 - 0215FFFF ... Erase result: 0000
    Erasing cmt zone 02160000 - 03FBFFFF ... Erase result: 0000
    Send CMT CFG...
    Writing cmt...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-635\rm635__10.10.mcusw...
    Sending CMT HASH for NOLO
    Sending CMT HASH for KEYS
    Sending CMT HASH for PRIMAPP
    Sending CMT HASH for PASUBTOC
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected
    cmt->PAPUB_CERTIFICATE_DATA_BB5 block detected, sending...
    Sending CMT HASH for UPDAPP
    Sending CMT HASH for DSP0
    Sending CMT HASH for MCUSW
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-635\rm635__10.10.ppm_m_c...
    Processing C:\Program Files\Nokia\Phoenix\Products\RM-635\rm635__10.10.image_m_c_blue...
    Rebooting...
    Finishing CMT session...
    Restarting CMT...
    Pooling phone...
    MCUSW: V 10.10
    22-04-10
    RM-635
    (c) Nokia
    APESW: (null)
    VariantSW: (null)
    Prodcode: 0592535
    Done!

  2. #2
    Senior Member
    Join Date
    Sep 2011
    Posts
    174
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flashing S40 Phones Using JAF with USB

    good bu too much typed ur hands would be paining

  3. #3
    Member
    Join Date
    May 2011
    Posts
    51
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flashing S40 Phones Using JAF with USB

    Quote Originally Posted by gckool
    good bu too much typed ur hands would be paining
    Hahaha! Not that much bro! I just typed the method i did and the rest is JAF log which i copied and pasted here. It wasn't that much bro. By the way thanks.

  4. #4
    Junior Member
    Join Date
    Feb 2012
    Posts
    3
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flashing S40 Phones Using JAF with USB

    please help what shoold i do if my s40 dead usb

  5. #5
    Junior Member
    Join Date
    Jan 2012
    Posts
    3
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flashing S40 Phones Using JAF with USB

    how u selected files..... i flashed 3110c bt its jus showing logo n gets turn off

  6. #6
    Junior Member
    Join Date
    Jan 2012
    Posts
    3
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flashing S40 Phones Using JAF with USB

    switch on the fone n put it on chargin...

  7. #7
    Member
    Join Date
    May 2012
    Posts
    55
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flashing S40 Phones Using JAF with USB

    bro i did every steps that mentioned bt..at end ..it says phone is not in flash mode...
    plz.

  8. #8
    Member
    Join Date
    Mar 2011
    Posts
    36
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flashing S40 Phones Using JAF with USB

    hello.. condition of my x5-01 : only vibrets when i press power button
    i have downloaded latest files for my rm-627
    i have selected files manually...and click on flash...and get this error
    "Searching for phone...Found
    Error reading phone init data..."

    pls help some one...please

    btw..x5-01 supports usb charging.

  9. #9
    Junior Member
    Join Date
    Aug 2011
    Posts
    3
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flashing S40 Phones Using JAF with USB

    install Phoenix latest version to fix all above problem (phone not found in JAF log)

  10. #10
    Member
    Join Date
    Mar 2011
    Posts
    36
    Thanks (Given)
    0
    Thanks (Received)
    0

    Default Re: Flashing S40 Phones Using JAF with USB

    Quote Originally Posted by marikanos
    install Phoenix latest version to fix all above problem (phone not found in JAF log)
    what is "error reading phone init data "


 
Page 1 of 2 12 LastLast

Similar Threads

  1. Why are Android phones better than Symbian phones?
    By usta in forum Android Phones
    Replies: 1006
    Last Post: 02-11-2013, 09:13 AM
  2. Replies: 5
    Last Post: 11-15-2012, 10:19 AM
  3. [REQ] Flashing C7 (and other Symbian^3 phones)
    By mcdaddymike in forum Symbian^3 Firmware Discussion
    Replies: 2
    Last Post: 07-27-2011, 02:37 PM
  4. [MOD] Disable Viration at Lock/Unlock (SIS) for flashing/Non-flashing
    By LORD MADA in forum Symbian S60V5 Modding
    Replies: 4
    Last Post: 10-26-2010, 09:51 PM
  5. [MOD] Disable Camera sound N97 MINI for Flashing/non-flashing (SIS)
    By LORD MADA in forum Symbian S60V5 Modding
    Replies: 0
    Last Post: 10-26-2010, 09:40 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •